Autodesk drawing tutorials inventor how to#
Autodesk drawing tutorials inventor professional#

Be sure to type in ALL CAPS since that is the engineering standard. Here you can edit the information that will appear in the lower box. To edit this information, click the Inventor icon at the very top right and select iProperties. This is used to keep track of approval and who has seen or edited the part. We will now change the information in the bottom right of the drawing. This information is available since we used the вЂњholeвЂќ tool when modeling the part. Now click the dotted line in the top view to give the bolt information. Select the вЂњHole and ThreadвЂќ tool from the Annotate menu. Note: We donвЂ™t give the dimension of the total height because we already gave that in the last view. Type вЂњX2вЂќ after the вЂњ>вЂќ to show that there are 2 flanges of the same thickness. The symbol вЂњ>вЂќ is the numeric value that is being dimensioned. Dimension the thickness of one of these flanges and then click again on the number to bring up the following window: This view has 2 flanges that stick up and are the same thickness. This view is now has all the dimensions it needs. The first line you click is the noted one and the second is the reference one. Click 2 of the hidden lines to create a chamfer note. Now use the вЂњChamferвЂќ tool to mark the chamfer. Use the following command and click both the inner circle and outer top curve: In drawings, it is useful to include center marks for holes. Go to the Annotate tool bar and select general dimension at the top left.Д¬lick the following lines just like you would when you dimension sketches.Д¬ontinue dimensioning until you have done the following: This means you give enough information so that every feature is defined without being redundant. When dimensioning a part, you want it to be вЂњfully dimensionedвЂќ. To move individual views around on the page, click them once to select them, then click and drag the red dotted box surrounding them. When finished, right click and choose create.Дouble click on the top right view and select shaded to make it a solid looking part. Use the image below to draw and annotate the first of two sketches for the loft. This automatically starts the вЂњProjectedвЂќ tool which allows you to place different 2D and 3D views of the part. Mastering Autodesk Inventor 2020 and Autodesk Inventor LT 2020. Change the scale to 5:1.Д¬lick ok or click on the place where you want the part to be. If you do not have bracketDrawing.ipt open you will have to browse for the right file. To read more about engineering drawings, see: Engineering DrawingsДЇor this tutorial, download the part: bracketDrawing.iptДownload and open bracketDrawing.ipt from the website.Д¬reate a new.

Autodesk drawing tutorials inventor how to#

We will go over base and projected views, how to fully dimension a part and section a part.

Autodesk drawing tutorials inventor professional#

This workshop will teach now to create professional technical drawings.